Only one line of results

With Paging checked, FinishLynx sends results to a scoreboard one page at a time, and Paging Size sets how many lines are on each page. With Size set to 1, every result cycles through a single line.

How to fix it

Set the page size to match the board

  1. Go to Scoreboard | Options and select the scoreboard.
  2. In the Results section, check Paging and set Size to the number of result lines your board has, for example 3 for a three-line board.
  3. Set Time to how many seconds each page stays on the board before the next one.
  4. Optional: enter a number in Max to send only the top finishers. Leave it blank to page through everyone.
  5. Click OK and test with an evaluated event.
    • Scoreboard | Refresh All (Alt+E) restarts the paging from the top.

The manual's Scoreboard Configuration page describes the Paging settings.

Good to know

Results replace the running time only once the running time is stopped or finished. If the running time stays on the board, see Time missing or clock won't stop.

Want one result at a time on purpose?

  1. Use "one at a time" mode: Results Auto, Paging checked, Size 1, Time 0. Results are then sent one at a time, only when they change.