Initial connection

Camera VDM (Video Display Module) sends scoreboard data and photo-finish images from the HDMI port of an EtherLynx Vision-series camera to any HDMI display (TV, LED panel), with no separate Windows computer.

It is an option or upgrade on the Vision and Vision PRO, and included on the Vision PRO X (2026 hardware revision, FinishLynx 13.10 or later).

How to fix it

Set up Camera VDM

  1. Connect the HDMI port on the back of the camera to your display.
  2. In FinishLynx, go to Scoreboard | Options… and click New.
  3. Select the VDM script: VDM.lss in FinishLynx 13.20 or later (it replaces the earlier separate VDM scripts).
  4. Set Serial Port to <Camera Name> (HDMI).
  5. Set the output size (Width and Height) and position (Left and Top) to match your display. For the Lynx Portable Display, that is 208 x 104 pixels.
  6. Set your Running Time and Results preferences and click OK.
  7. Restart FinishLynx, then open or create an event to see the output on the display.

If the layout is cut off or shows one big letter

  1. In Scoreboard | Options…, select the VDM scoreboard.
  2. Set Width and Height to the size the VDM script is laid out for. The Lynx Portable Display's size is 208 x 104. A larger size such as 800 x 600 can show just one big letter.
  3. Check Rotate is Off.
  4. Click OK and restart FinishLynx.

Send a higher resolution to a TV or monitor

The camera's HDMI port sends 800 x 600 by default. You can raise it yourself in the FinishLynx Other Settings.

  1. Boot the camera in FinishLynx.
  2. Hold Ctrl+Shift and click File | Options… to open the Other Settings.
  3. Expand Hardware, Ethernet and Display, and select Resolution.
  4. Enter the number for the resolution you want: 1 = 640x480, 2 = 800x600 (default), 3 = 1024x768, 4 = 1280x1024, 5 = 1400x1050, 6 = 1366x768, 7 = 1600x900. On a Vision PRO X, 8 = 1920x1080. 0 turns the HDMI output off.
  5. Click OK, then restart FinishLynx and the camera.
  6. In Scoreboard | Options…, set the VDM scoreboard's Width and Height to suit the new size.

The setting is Hardware\Ethernet\Display\Resolution, also listed on the FinishLynx Other Settings page. VDM goes up to 1600 x 900 on Vision-series cameras and 1920 x 1080 on the Vision PRO X.

If <Camera Name> (HDMI) is missing from the Serial Port list, see No HDMI option in serial port. For images and logos on the display, see Output options.