No HDMI option in serial port
The <Camera Name> (HDMI) choice appears in the Serial Port list only for an EtherLynx Vision-series camera with the Video Display Module (VDM) option. VDM is an option or upgrade on the Vision and Vision PRO, and included on the Vision PRO X (2026 hardware revision, with FinishLynx 13.10 or later).
A display on the camera's HDMI port that shows a row of characters (such as "iiiiiii") and text like "FinishLynx x86 Monitor, copyright…" is working: that is the camera's own startup text. It means VDM is not active on the camera yet.
How to fix it
Check the camera
- Confirm the camera is a Vision-series camera (Vision, Vision PRO or Vision PRO X). VDM is only available on Vision-series cameras.
- Boot the camera in FinishLynx, then open Scoreboard | Options…, click New and open the Serial Port list. The HDMI choice is listed by camera name.
- If the camera is booted and there is still no HDMI choice, VDM isn't active on that camera. If you were sent a VDM upgrade code, enter it and reboot the camera (next section).
- Once the HDMI choice is there, follow Initial connection.
Add VDM to a Vision-series camera
- Lynx supplies the VDM upgrade (part 5LVDM) as a code issued against your camera's serial number. VDM can also be added while the camera is at Lynx for service.
- Load the camera in FinishLynx, open the camera settings, go to the Setup tab, enter the code and click Apply.
- Restart the camera and FinishLynx. <Camera Name> (HDMI) should now be in the Serial Port list.
- If the code says invalid, work through Upgrade code: a code works once, and it is tied to the serial number programmed in the camera, which can differ from the sticker.
Without VDM
- Drive the same display from a computer instead: run ResulTV or ResulTV-VDM on a Windows computer on the FinishLynx network, and connect that computer to the display by HDMI. See Results on a video board or TV.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.