Results on a video board or TV
FinishLynx sends scoreboard data, not a video picture. To show results on a video board, LED wall or TV, something has to turn that data into a picture for the board. Lynx has four ways to do that, and which one fits depends on your board and your camera.
How to fix it
Your options
- VDM (Video Display Module): a Vision-series camera with VDM sends running time, results and images straight from its HDMI port, with no extra computer. See Initial connection.
- Up to 1600 x 900, or 1920 x 1080 on a Vision PRO X (800 x 600 by default); the layout comes from the VDM script; no scrolling.
- ResulTV: Windows software on a computer you supply. FinishLynx sends data to it over the network, and the ResulTV computer sends HDMI to the board. See FinishLynx connection.
- Resolution up to your display's maximum, fully custom layouts, and data from FinishLynx, FieldLynx, LynxPad and ReacTime.
- ResulTV-VDM: a simpler, script-driven version of ResulTV on your own Windows computer, locked to the size of your display. See Initial connection.
- Portable-VDM: ResulTV-VDM on a battery-powered Mini PC in a weatherproof box. See Initial connection.
- Third-party routes: some boards have their own, for example LED video displays. That page also covers a Daktronics board stuck on old or sample data.
For a stadium board or video wall, Lynx technical support usually recommends ResulTV or ResulTV-VDM. Camera VDM and Portable-VDM are aimed at smaller portable LED displays.
ResulTV or ResulTV-VDM
- ResulTV gives the most freedom: you build the layout yourself, with any fonts, graphics and data fields.
- ResulTV-VDM is simpler to run but less flexible, and it is locked to the size of your board. You can still change the colors, font, size of the data fields, number of results lines and which fields show, and Lynx can help you build a layout that fits.
Show results on a TV
- A TV works like any other HDMI display: ResulTV drives it with its stock layouts, and VDM sends to any HDMI-compatible screen. Pick the ResulTV layout that matches the TV's resolution.
- Set up the connection on both computers, FinishLynx and ResulTV, so the clock and results flow between them. See FinishLynx connection.
Feed a stadium board or video wall as well as an infield display
- Keep the camera's HDMI on the infield display.
- For the stadium board or a third-party LED wall, run ResulTV or ResulTV-VDM on a dedicated Windows computer on the FinishLynx network, with HDMI out to the board's controller or the wall's video processor, the same input a laptop would use.
Can the board take results over Ethernet instead of HDMI?
No. An LED display only shows the video it is fed, like a TV or monitor. It cannot make its own graphics from a network connection.
- The RJ45 ports on an LED display carry LED panel data from a video sending card, for example to chain panels together. They are not a network input for FinishLynx.
- The network link runs from FinishLynx to the ResulTV computer. From there, an HDMI cable takes the picture to the display.
- If you plug a computer into the display over HDMI, the display shows the top-left corner of the computer's screen. That proves the display works; the results come from the software.
What decides which option fits
- Your board's make and model, and its pixel width and height.
- Whether you have a Vision-series camera. VDM is an option on the Vision and Vision PRO and included on the Vision PRO X (2026 hardware revision, FinishLynx 13.10 or later).
- What you want to show (running time, results, images) and how much you want to customize the layout.
Compare the four options side by side in LED Video Display Options, then use the button below to confirm what your board needs. If the real problem is a dark camera image late in the meet, see Too dark at dusk or under lights.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Related resources
- LED Video Display Options — Guide · PDF