LED video displays

FinishLynx sends to a Daktronics LED video display over the network with two scoreboard entries, both on Dak-Extended.lss and Network (UDP): running time on port 21000 and results on port 21100. The board shows whatever it last received, so old data on the board means the live data isn't reaching the controller.

Not sure it's a video board? Which Daktronics setup do I have lists each setup in a few words.

How to fix it

Set up FinishLynx

  1. Go to Scoreboard | Options and click New.
  2. Set up the Running Time entry:
    • Script: Dak-Extended.lss
    • Name: Running Time
    • Code Set: Single Byte
    • Serial Port: Network (UDP), Port 21000
    • Running Time: Normal
    • Results: Off
  3. Click New again to add a second entry.
  4. Set up the Capture Results entry:
    • Script: Dak-Extended.lss
    • Name: Capture Results
    • Code Set: Single Byte
    • Serial Port: Network (UDP), Port 21100
    • Running Time: Off
    • Results: Auto, with Always send place enabled
    • Paging enabled, Size set to the number of lanes the display can show, Time 5.0
  5. Click OK.
  6. Restart FinishLynx to load the scripts.
  7. A separate FinishLynx edit computer gets its own Edit Results entry with the same settings as Capture Results, on port 22000.
  8. If the system also has a football or track scoreboard on an All Sport 5000, that gets its own Powertime.lss entry on a serial port: see LED scoreboard (All Sport 5000).

If the board shows old or test data instead of live results

  1. Don't go by the Status alone: FinishLynx shows Running even when the board isn't receiving anything.
  2. Check both entries still match the settings above: Dak-Extended.lss, Network (UDP), port 21000 for running time and 21100 for results.
  3. Check the network cables and connections between the FinishLynx computer and the Daktronics controller.
  4. Ask whoever runs the Daktronics controller to confirm it is still listening on ports 21000 and 21100.
  5. Allow FinishLynx through the Windows Firewall on the FinishLynx computer.
    • Open Windows Security | Firewall & network protection | Allow an app through firewall, click Change settings, and check Lynx for both Private and Public.
    • If Lynx isn't listed, click Allow another app, browse to C:\Lynx\Lynx.exe and check the same boxes.
    • Turning the firewall off briefly is a quick test.
  6. If you run separate capture, evaluate and HyTek computers, follow Daktronics' Track & Field Interfaces for Scoreboards & Displays setup guide; it is written for that layout, and the latest version is on Daktronics' support site.

Galaxy or M3 message display

  1. These take one Dak-Extended.lss entry on Network (UDP), port 3002, with Running Time Normal, Results Auto and Paging on (Size = the lanes the display shows, Time 5.0).
  2. Running time and results share that port, so they can't show at once: press Alt+S in FinishLynx to stop the running time and show the results.

HyTek Meet Manager can also send start lists, results and team scores to a video or message display with its optional Alpha Scoreboard Interface, bought from HyTek. HyTek and FinishLynx exchange files over the network: see HyTek.

Related resources