Upgrade code
A camera upgrade (LuxBoost, VDM, HighRes) is a code entered once in the camera itself, not software installed on the computer. After entering it, both the camera and FinishLynx have to restart before the new option appears. No internet connection is needed.
How to fix it
Enter the code
- Load the camera in FinishLynx
- Open Camera Settings and click the Setup tab
- Type or paste the code in Upgrade Code, click Apply, then OK on "Upgrade code accepted"
Restart the camera and FinishLynx
- Restart the camera from the Hardware Control window: right-click the camera's Power field and choose Restart (or power it off and on)
- Close and reopen FinishLynx. Both restarts are needed before the option shows
Check that the upgrade took
- LuxBoost: Camera Settings | Parameters shows the higher LuxBoost levels and Auto LuxBoost
- VDM: the Serial Port list in Scoreboard | Options (New) includes "<Camera> (HDMI)". See No HDMI option in serial port
- HighRes: Pixel Mode 200% is available. See HighRes frame height and frame rate
- If the LuxBoost settings are missing entirely, update FinishLynx to the latest version from the Software page
If FinishLynx says "Invalid code"
- If the code once said accepted and now says invalid, it has already been applied: codes work only once. Restart the camera and FinishLynx as above and check again
- Codes are tied to one camera serial number, and the serial programmed in the camera (shown on the Setup tab) can differ from the sticker underneath
- A code issued against the wrong serial is reissued: use the button below with both serial numbers
On a new computer
- Upgrades live in the camera. A new computer needs no code; the option is there as soon as the camera loads
- An upgrade bought years ago is still in the camera. Before looking for the old code, load the camera and check Camera Settings | Parameters for the LuxBoost levels drop-down
- The plug-ins (RadioLynx, Automatic Capture, LapTime and others) are different: each is its own installer with its own 12-character serial. See Lost serial numbers
Lost the code?
Lynx can look it up: use the button below. If you are sending the camera in for calibration or repair, ask for upgrades on the same request. See Camera calibration.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.