Output options
Portable-VDM accepts data from FinishLynx, FieldLynx, LynxPad and ScorePlus. FinishLynx, FieldLynx and LynxPad send through the ResulTV-Video scripts over Network (connect) on port 1024, to the MiniPC's IP address for your connection method.
ScorePlus is the exception: it runs on the MiniPC itself and needs no script. If the connection is not up yet, start with Initial connection.
How to fix it
Set up FinishLynx to send data
- Open FinishLynx and go to Scoreboard | Options….
- Click New to create a new scoreboard output.
- Set Script to ResulTV_Video_1line.lss.
- Set Serial Port to Network (connect), Port to 1024, and the IP address to the MiniPC's address for your connection method.
- Set Running Time to Normal and check Force Stop.
- Set Results to Auto and Size to 1, check Always send place, then click OK.
- Close and restart FinishLynx.
Set up FieldLynx (or FieldLynx Lite) to send data
- Open FieldLynx or FieldLynx Lite and go to Options | Preferences….
- Select the Scoreboard tab. FieldLynx Lite already includes the Scoreboard plug-in; full FieldLynx needs the separate FieldLynx Scoreboard plug-in.
- Click New to create a new scoreboard source.
- Set Results Scripts (Metric and English) to ResulTV_Video_results.lss and Standings Scripts to ResulTV_Video_standings.lss.
- Set Serial Port to Network (connect), Port to 1024, and the IP address to the MiniPC's address for your connection method.
- Close and restart FieldLynx.
Run ScorePlus from a phone
- Connect your phone to the same network as the Portable-VDM (the Portable-VDM1 Wi-Fi hotspot, or the Lynx network).
- Scan the QR code shown on the display. The ScorePlus interface opens.
- Select your Sport and open the Operate tab.
- Use the on-screen controls to run the clock, quarter and score. The ScorePlus video tutorial shows it in use.
Adjust the display window with @ commands
ResulTV-VDM accepts command messages that begin with @ to control the display remotely. In FinishLynx, go to Scoreboard | Edit Messages…, type the command in the message field and click Send. For example, to set the display to 208 x 104 pixels, enter @resize 208x104 and click Send.
- @resize W,H resizes the display window (width and height in pixels, minimum 50).
- @position X,Y moves the display window (X and Y screen coordinates in pixels).
- @top yes/no turns always-on-top mode on or off.
- @scroll yes/no turns horizontal ticker scrolling on or off.
- @image <path> sets the base folder used to resolve ImageDraw file names.
- @screens N sets how many physical screens the display spans (1 to 8).
- @profiles <name> switches to a named display profile.
Good to know
Only the first @ command in a message line is processed, arguments are not case-sensitive, and unknown commands are ignored.