Scoreboard plug-in and settings
Full FieldLynx drives every output on its Scoreboard tab, serial or network, through the Scoreboard plug-in (FLSB): LED boards, ResulTV, the VeriLight and AthleticLIVE. The Laser (FLLaser) and Wind (FLWind) plug-ins install the same way, and each must match your FieldLynx version.
Update FieldLynx and the plug-ins together. FieldLynx Lite already includes all three plug-ins, so it needs no separate installer.
How to fix it
Get the plug-ins
- The Scoreboard, Laser and Wind plug-in installers aren't on the Software page yet: they come from Lynx support (button below)
- FieldLynx 1.96 needs at least Scoreboard plug-in 1.55, Wind plug-in 1.23 and LaserLynx plug-in 1.22. Scoreboard 1.53 was the version for FieldLynx 1.92
- Right-click each installer and choose Run as administrator, then close and reopen FieldLynx
- Check Help | About in FieldLynx to confirm the versions
Set up a scoreboard in FieldLynx
- Go to Options | Preferences, Scoreboard tab, and click New
- Give the output a name so you can tell scoreboards apart
- Choose the Results Scripts (Metric and English) for your board from the Scoreboard Scripts library, Lynx (for FieldLynx) section
- Set Serial to the connection the board uses (a COM port, or Network for a board on the network) and click Settings for the board's data parameters
- Click OK, then close and reopen FieldLynx. Back on the Scoreboard tab the Status should now read Running
Daktronics boards
- Start with the standard settings for the board's Daktronics script. For a TI-2021, that is 19200 baud, 8 data bits, no parity, 1 stop bit
- There is no Lynx script for the non-standard 11-segment TI-2021 variant. Use the regular TI-2021 settings and script as the starting point
Scorebird boards
- Use scorebird_field_standings.lss with the Scorebird NeST at 9600 baud, 8 data bits, no parity, 1 stop bit. It is in the Scorebird (for FieldLynx) section of the script library
Field results on spectators' phones
- AthleticLIVE can show Up Now, Last Mark and standings from FieldLynx using its own alive.lss script over a network connection. The steps are in FieldLynx Scoreboard with AthleticLIVE
For sending field results to ResulTV, see Connection to ResulTV. For a MicroTab, see MicroTab LED Display.
Ask for the plug-in download links below.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.