Connection to ResulTV
FieldLynx sends results to ResulTV over the network through the FieldLynx Scoreboard plug-in. One side is set to Network (connect) and the other to Network (listen) on the same port: it doesn't matter which side does which, only that they're paired.
When nothing arrives, the plug-in isn't installed, both sides are in the same mode, or the port or IP address doesn't match.
How to fix it
Set up FieldLynx
- Make sure the FieldLynx device and the ResulTV computer are on the same network, and note the ResulTV computer's IP address
- In FieldLynx, go to Options | Preferences, Scoreboard tab. This tab needs the Scoreboard plug-in: see Scoreboard plug-in and settings
- Click New to create a scoreboard source
- Choose the scripts
- Recommended: Results Scripts (Metric and English) ResulTV_Video_results.lss and Standings Script ResulTV_Video_standings.lss. ResulTV then only needs a single Video Display object, not a hand-built layout
- Legacy: ResulTV_results.lss and ResulTV_standings.lss still work, but need a ResulTV layout with every field added by hand
- Set Serial Port to Network (connect)
- Set the Port to match the port ResulTV listens on (default 1024)
- If ResulTV already receives FinishLynx on 1024, give FieldLynx its own ResulTV source on a different free port, such as 1025. That is how ResulTV shows both at once
- Set the IP Address to the ResulTV computer's address
- Click OK, then close and reopen FieldLynx
Set up ResulTV
- In ResulTV, go to File | Options, Sources tab, and add a source set to the opposite mode on the same port: Network (listen) if FieldLynx connects
- Load the matching source script
- With the Video Display object: VideoDisplay.rss, then a layout with a Video Display object (see Working with Video Display objects)
- Legacy, with the hand-built layout: FieldLynx.rss
- Restart ResulTV if the source status says Not Loaded
If results still aren't reaching ResulTV
- One side must be Network (connect) and the other Network (listen); they can't both be the same
- The port must match on both sides, and the IP address in FieldLynx must be the ResulTV computer's exactly
- Both devices must be on the same subnet
- Text that arrives as gibberish means the scripts don't match: VideoDisplay.rss pairs with the ResulTV_Video scripts, FieldLynx.rss with the legacy ones, and a FinishLynx source must not use FieldLynx.rss. See Weird characters and letters