Overlays or labels missing

Line labels (the place, ID or time written on the image) are drawn on the split and evaluation lines. They go missing when split lines are turned off, or when the label overlay has been toggled off.

How to fix it

Turn on split lines

  1. Click Image | Options….
  2. Under Show Lines, choose a color for Splits.
  3. Click OK.
    • Chip reads come in as split lines, so the labels appear on them once the lines are showing, the same way they do when you enter a finisher by hand.

Turn line labels back on

  1. With the event open, press Alt-N to toggle line labels (or click Image | Overlay | Lines Labels…).
  2. In the Text Overlay dialog, set the font, size, and the colors for Lines and Splits.
  3. Build the label text with the Insert menu, which lists the field codes; a semicolon starts a new line.
  4. Click Apply to check it on the image, then click OK. The setting carries over to the next event.

If the labels are on but show nothing for chip reads

  • The labels can only show reads FinishLynx has received. Check that the status bar shows LapTime: Received #, not NOT CONNECTED.
  • In LapTime | Options…, delete any devices left from an earlier setup, then restart FinishLynx.
  • If nothing shows in the Results area either, work through Reads arrive but no marks.

See Overlay Features and Show Lines Features in the manual.

Good to know

Line labels are also a quick way to scroll through a cross-country image and confirm every chip was received and the order is right.

Related resources