License and seats

NetExchange has no software serial number, so a package with "no serial number" is normal. Its license lives in the green USB hardware key that came with it: NetExchange won't run without the key, and the number of FieldLynx, LynxPad and other clients it allows comes from the license on that key.

How to fix it

Keep the key in

  1. Plug the USB key into the computer that runs NetExchange and leave it there for the whole meet
  2. Open NetExchange. The products your license enables are highlighted in green, with the number of clients allowed for each
  3. The status bar should read that the license never expires

How many seats you need

  • Each FieldLynx device connected at the same time uses one seat, so you need as many FieldLynx seats as field events running at once
  • Seats belong to one key, and a key can only be at one meet at a time. Two meets on the same day need two NetExchange keys, each with its own seats

Add seats (clients)

  1. With the key plugged in, go to Help | License
  2. Enter the license code Lynx sent for that key. The code is tied to the key's ID, so it only works with the key it was issued for
  3. Click OK, then close and reopen NetExchange. The new client count shows against the product
    1. New seats arrive as a new code by email. You don't need to send the key to Lynx or wait for a new one

If NetExchange shows a lease expiration message

  1. Check the USB key is plugged in and seated, and try another USB port
  2. Close and reopen NetExchange
  3. If the message stays, the key needs a new license code from Lynx: ask for it with the button below, giving the key ID. Enter the code in Help | License, click OK and reopen NetExchange

If NetExchange opens but FieldLynx can't reach it, see Connection to FieldLynx. If it won't open at all, see App does not open.

Good to know

A hardware key from an older NetExchange version needs a new license from Lynx before it works with the current version, and setting the computer clock backward after activation disables NetExchange.

Talk to Lynx Support

Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.

Contact Support