Display on the wrong screen or not full screen

ResulTV has two windows: the gray configuration screen where you edit, and the display screen the audience sees. The display screen can go to a second monitor, projector, TV or scan converter while the configuration screen stays on the computer.

If the display is on the wrong screen, Windows has not extended the desktop or ResulTV is not told to use Monitor 2.

How to fix it

Send the display to a second screen

  1. Connect the monitor, projector, TV or scan converter to the VGA or HDMI port on the ResulTV computer.
  2. In Windows Display Settings, select display #2 and choose Extend desktop to this display.
  3. In ResulTV click File | Options, open the Display tab, select Monitor 2 and click OK. The display screen now appears on the second screen.
  4. On the computer, hold Alt and press Tab to move between the configuration screen and the display screen.

If the display is sideways or the logo is in the way

  • For a display mounted on its side (the Lynx Portable Display needs this), go to File | Options | Display and set Rotate to Left or Right. Off means no rotation.
  • If a Video Display object is also rotated, the content appears upside down, so rotate only one.
  • For the Lynx 360 Display, File | Options | Display has a Scrolling switch: set it On.
  • The Lynx logo cannot be removed, but you can choose its corner from the Lynx Logo list on the same Display tab.

One laptop for FinishLynx and ResulTV

  • You can run FinishLynx on the ResulTV computer and send the display to the second screen. The connection settings for that are in FinishLynx connection.

Manual page: Displaying ResulTV on multiple monitors.

Good to know

For broadcast or a composite video feed, connect the monitor output to a scan converter: most let you keep the picture on the computer monitor at the same time.