FinishLynx receiving multiple starts

Extra starts with no gun fired come from one of two things: a loose connection in the transmitter input cable, or the sound sensor being set off by something else, most often the wind.

How to fix it

Check the transmitter input cable

  1. Pull the black and green connector covers up the wires
  2. Check the connection between each wire and its banana plug
    • The connection is a small screw that tightens down onto the wire. Make sure it is secure

If the wind sets the sensor off

Lynx doesn't sell a windscreen for the sound sensor, and there's no replacement part for one.

  1. Shield the sensor from the wind with any object you have handy: a box, a plastic container such as Tupperware, anything that blocks the wind

Clear a false start before the race

Arming the event resets the clock to 0:00, on the scoreboard too, and readies the event for the real gun.

  1. Click the Arm button on the event window, the last icon to the right of the start list at the top left, or click Event | Arm (Ctrl+A)

If the race ran with the wrong start

Every start FinishLynx received is in the start list at the top left, including the real gun.

  1. Click the right start in the start list
  2. Click the Add Selected Start icon to its right to apply it to the current event
  3. Check the times in the results. For more ways to fix a race's start, see Recover a race after a missed start