Does the Lynx Wind Gauge need calibration or maintenance?
It is solid-state with no moving parts and its datasheet calls it maintenance-free. Governing-body rules on calibration are quoted on the datasheet; ask Lynx about your gauge.
The Lynx Wind Gauge is solid-state, with no moving parts, and its datasheet describes it as maintenance-free. The housing is corrosion-free polycarbonate rated IP65.
World Athletics rules, quoted on the datasheet, say wind gauges must be made and calibrated to international standards, with their accuracy verified by an organization accredited by the national measurement authority. For calibration questions about your gauge, ask Lynx support.
If the gauge was knocked over or shows no light, see No light, solid red light or stopped after a fall in Troubleshoot.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Goes deeper
- Lynx Wind Gauge datasheet — Documents · Datasheets
Related questions
- FieldLynx fails to receive a wind reading even though the gauge is connected and working. How can I correct this? — If the gauge counts down and reads, check its battery and the USB-to-serial adapter; try the camera's C-Box or serial port instead. If the countdown never starts, check the connections and the Wind options.
- How often does my camera need calibration, and how do I check the date? — At least every four years. The last calibration date is on the Setup tab of Camera Settings; past four years, FinishLynx shows a Timer tab as a reminder.