Configure the Block Sensors
After you have decided how to power your Block Sensors (either with battery or electrical power) and after you have turned on all of the Block Sensors, you must configure each Block Sensor to work during the competition. Repeat the steps listed below for each Block Sensor you have set up in a lane on the track.
- a. Assign lane numbers to each Block Sensor.
- Press the Menu key once.
- Press the up and down arrows until you arrive at the Main Menu | System screen.
- Press the Menu key once.
- Scroll until you arrive at the System Menu | Lane Number screen.
- Press the Menu key once.
- At the Lane Number | 1 screen, press the up arrow key to increment the lane number.
- After you have chosen the desired lane number, press the Menu key once more to arrive at the ReacTime | Ready to Start screen. Note that the lane number you just selected appears in the upper left corner of the LCD (see Figure 40).
- b. Assign the network type to each Block Sensor.
- Press the Menu key once.
- Press the up and down arrow keys until you arrive at the Main Menu | System screen.
- Press the Menu key once.
- Scroll until you arrive at the System Menu | Network Type menu. Press the Menu key once.
- Scroll to choose Network Type | Wired or Network Type | Wireless.