Line or spot on the image
A dark line or spot that shows up in the same place on every image can be a speck of dust on the lens, the filter or the sensor. A quick test tells you whether it's on the camera, and compressed air may clear it.
How to fix it
Check the mark is on the camera
- Move the camera up or down slightly and capture again
- If the mark stays in the same place in the image instead of moving with the scene, it's on the lens or the camera, not on the track
- If it is still there after you change the lens, it's on the filter or the sensor, not the lens
Blow it clear
- Remove the lens
- Blow compressed air toward the sensor and inside the lens
- Refit the lens, stopping as soon as it reaches its stopper, and capture a test image
If it isn't one fixed mark
- Alternating black and white stripes, rather than one fixed line, mean the camera is moving in and out of alignment: see Tripod blows over or shifts in wind
- Regular dark vertical bars under stadium or indoor lights come from the artificial light: see Too dark at dusk or under lights
If the mark stays after a lens change and compressed air, only Lynx can check the sensor.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.