LynxPad

FinishLynx and LynxPad share one folder. LynxPad writes the start list files (lynx.evt, lynx.ppl and lynx.sch) into it when you save and seed, and FinishLynx reads them from there and writes each race's .lif results file back to the same folder.

It is a local wired network, not the cloud. On two computers, share the folder first, then point both programs at it.

How to fix it

Set the LynxPad directory

  1. In LynxPad, open your competition (lynx.cmp).
  2. Click File | Options…, click Browse… and choose the folder FinishLynx will use (for example C:\Meets), then click OK.

Set the FinishLynx directories

  1. In FinishLynx, go to File | Options and click the Database tab.
  2. Set Data Source to Files, set both the Input Directory and the Output Directory to the same folder, and set Write LIF File to On.

Write the start lists from LynxPad

  1. LynxPad has no separate "write network files" step: it writes lynx.evt, lynx.sch and lynx.ppl when you save the competition and when you seed an event.
  2. Save the competition, seed at least one event, then open the folder and check the files are there.
    • If Windows hides file extensions, lynx.evt shows as just "lynx".

Load the schedule and return the results

  1. In FinishLynx, go to File | Goto Event and click Load Schedule. The events from lynx.evt appear in the drop-down list.
  2. Choose the event and click OK. Capture, evaluate and save the race as usual.
  3. In LynxPad, select the event in the Events window and click Heats/Flights | Load Results. The times appear in the Heats window.
  4. If the list stays empty after Load Schedule, see Start lists not found.

Good to know

Start lists are not available until at least one event has been seeded in LynxPad.

Which IP addresses to use

  • The FinishLynx computer uses 192.168.0.5.
  • 192.168.0.90 is only for a second computer that runs LynxPad (or other meet software). Both go on the same switch as the camera.
  • If LynxPad and FinishLynx run on the same laptop, use only 192.168.0.5 and skip the 192.168.0.90 step in the Quick Start Guide.

Internet on the LynxPad computer

  • A separate LynxPad computer can use Wi-Fi, or a second network adapter (for example a USB Ethernet adapter), for the internet, with its wired connection on the FinishLynx network.
  • If LynxPad runs on the timing laptop, keep Wi-Fi off while the cameras boot. Wi-Fi can be used after the cameras have loaded if it is on a different subnet from the camera network.
  • Lynx recommends keeping Wi-Fi off on timing laptops if possible, and doing internet work (live results, meet management) on a separate computer.

Event colors in LynxPad

  • White: not seeded.
  • Pink or red: seeded.
  • Green: completed.
  • Blue: selected.

Related resources