Multi-computer networking
A multi-computer FinishLynx setup has one computer at the finish line capturing from the cameras, plus an evaluate computer (for example in the press box) and a meet management computer running HyTek, MeetPro or LynxPad. They share one meet folder on the capture computer, and every program's directories point at it.
Most problems come down to the folder not being shared properly or a directory pointing somewhere else. The click-by-click steps are in the Windows 11 networking guide or Windows 10 networking guide; use each computer's own.
How to fix it
Connect the computers and set their IP addresses
- Connect the computers (and cameras) to an unmanaged Ethernet switch on a private wired network, not a public one. A switch is the easy way to put several computers and cameras on one network.
- One switch for all the cameras and computers is fine. Separate switches are only worth it when you run a complete backup system on its own equipment and power, so a failure on one side can't stop a race.
- On a shared network, use the camera white list on each capture computer so each camera loads only where it should: see Share a camera between two computers. Cameras still need power from a PoE+ switch or their injector.
- Give each computer a static IP address with subnet mask 255.255.255.0:
- Capture computer (FinishLynx with the cameras): 192.168.0.5
- Evaluate computer: 192.168.0.15
- Meet management computer (HyTek, MeetPro, LynxPad or other meet software): 192.168.0.90
- Keep the addresses just above 192.168.0.5 free: FinishLynx gives them to the cameras (192.168.0.6, 192.168.0.7 and so on).
- If FinishLynx and the meet software run on the same laptop, that laptop uses only 192.168.0.5 and you skip the 192.168.0.90 step.
- With HyTek or MeetPro, skip the LynxPad-specific steps in the guide. The 192.168.0.90 address and the file-sharing steps still apply to a separate meet computer.
- Put all the computers in the same Workgroup, not on a Domain.
- On every computer that runs FinishLynx, allow it through the firewall: Windows Security | Firewall & network protection | Allow an app through firewall, click Change settings, and check the box to the left of Lynx plus Private and Public.
- If Lynx isn't listed, use Allow another app... and browse to
C:\Lynx\Lynx.exe.
- If Lynx isn't listed, use Allow another app... and browse to
Share the folders (Windows 11)
- On every computer, go to Start > Settings > Network and Internet > Advanced network settings > Advanced sharing settings.
- Under Public networks, turn on Network Discovery and File and Printer Sharing.
- Under All Networks, turn on Public Folder Sharing and use 128-bit encryption.
- On the capture computer, create a meet folder, right-click it and choose Show More Options > Give access to > Specific People, add Everyone and set the permission level to Read and Write.
- Keep this folder local on the capture computer. A save that fails with "Error accessing a file" means the Event Directory points at a network path; see Error messages and codes.
- On the capture computer, also share
C:\Lynx\Tempwith read and write permissions, so the evaluate computer can read the image files. - On each other computer, open File Explorer > This PC > Map Network Drive, browse to the FinishLynx computer by name, choose the meet folder and check Reconnect at sign-in.
- Point FinishLynx (File | Options | Database tab, Input and Output Directory, and the Event Directory under Event | Options) and your meet software at that folder, on every computer.
Set up the evaluate computer
- Follow Capture-and-read FinishLynx setup: Hardware Type set to None, and FinishLynx not run as administrator.
- The capture computer creates and saves each event; the evaluate computer opens it in reader mode and saves to merge its evaluation.
If a computer can't see or open the other one
- Not listed in File Explorer > Network: on both computers, open Services and set Function Discovery Provider Host and Function Discovery Resource Publication to Automatic, then start them.
- "Windows cannot access \\PC-NAME" (error 0x80070035) when mapping the drive, often after a Windows 11 update: follow the troubleshooting page at the end of the Windows 11 networking guide.
- Still blocked after those steps: Windows 11's file-sharing security settings (SMB signing and guest access) can block the share. Lynx can check these with you in a remote session.
- If sharing worked before and stopped after a Windows update, the update may have reset the sharing settings. Go through the sharing steps again on each computer and test before the meet.
One camera, two computers
- A camera boots into one FinishLynx at a time, so two computers can't both run the same camera, and an IdentiLynx can't be shared either. See Known limitations.
- To work on races from a second computer, use the capture-and-evaluate setup above: one computer runs the cameras and the other opens the saved races.
- With two full systems on one network, choose which computer loads each camera: Share a camera between two computers.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Related resources
- Windows 11 networking guide — Guide · PDF
- Windows 10 networking guide — Guide · PDF