Option grayed out or missing
A grayed-out or missing option in FinishLynx nearly always means the plug-in that unlocks it isn't installed, isn't licensed on this copy, or the feature isn't in your edition. Help | About tells you which.
How to fix it
Check Help | About
- Open FinishLynx and click Help | About. The window lists the installed plug-ins with their serials
- If the plug-in for the grayed-out feature isn't listed, install it from the Plugins section of the Software page with its serial
- Lost the serial? See Lost serial numbers
- A plug-in is only enabled once it is installed with a valid serial number: see Plug-Ins in the manual
Which plug-in unlocks what
- RadioLynx tab or RadioLynx port: the RadioLynx plug-in, and a timer-enabled camera (see below)
- LapTime tab, chip reads: the LapTime plug-in
- Capture Method: Automatic: the Automatic Capture plug-in (also called Auto Capture Mode or Virtual Photo Beam Unit)
- "<Camera> (HDMI)" in the scoreboard port list: the VDM camera upgrade (an upgrade code entered in the camera)
- Higher LuxBoost levels, Auto LuxBoost: the LuxBoost camera upgrade (an upgrade code)
- Pixel Mode 200%, frame height 1280: the HighRes camera upgrade (an upgrade code)
If the plug-in is listed but the option is still grayed out
- Check that the serials match: the first six digits of a plug-in serial must match the FinishLynx serial on the same computer
- A plug-in installed with a serial from a different FinishLynx license shows in the list but stays locked. Reinstall it with the serial that belongs to this FinishLynx serial
- RadioLynx only: check the label under the camera. If "Photo Finish" rather than "Timer Enabled" is colored in, the camera is non-timer-enabled and the RadioLynx settings stay grayed out. See RadioLynx port settings grayed out
- Camera upgrades (VDM, LuxBoost, HighRes) are entered in the camera, not installed on the computer. If the option is missing after a code was entered, see Upgrade code
If it disappeared after an update or a new computer
- Updating FinishLynx on the same computer keeps the plug-ins. On a new computer, every plug-in has to be installed again with its own serial
- If a plug-in vanished from Help | About after an update, run its installer again with its serial
FinishLynx LITE
LITE (the Scholastic package) has no plug-ins, so RadioLynx is always the start sensor and the Automatic Capture, LapTime and scoreboard options aren't available. See FinishLynx LITE vs full FinishLynx for what LITE can do and how to upgrade.
If the option is still grayed out after these checks, Lynx can check the license.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.