Training system vs Championship system

The Block Sensor is the same unit in both systems. The Training system runs each sensor on its own with the Start Button and Virtual Starter, while the Championship system puts every sensor under a Command Center, so several inputs, keys and menus only apply to one of the two.

How to fix it

What only applies to the Training system

  • The Block Sensor's Power supply, Photoeye and Signal Input (Start Button or Gun Sensor) inputs, and the Start key on the sensor
  • The Virtual Starter ("On your marks," "Set," gun) and the Training Menu | Intervals and Gun Source settings
  • Loudspeaker volume set per sensor at Training Menu | Volume (default 7)
  • Trials stored on the sensor: scroll them with the up and down arrows, delete the latest with Delete, or delete all at Training Menu | Delete Trials

What only applies to the Championship system

  • The Main Menu | System menu on each sensor (Lane Number and Network Type), the False Start Cable input, and the Command Center with its gun sensor and headsets
  • Loudspeaker volume for all sensors at once from the Command Center at System Menu | Remote Volume
  • Reaction times show on each sensor's LCD after the gun and disappear when the Start key on the Command Center is pressed again
  • Athlete Lockout Mode: the Command Center locks the sensor controls so athletes can't tamper with them. If a sensor won't turn off, hold the Delete key and the Off/On key together for 5 seconds

Every menu is listed in the Block Sensor Menu Reference and the Command Center reference; the setups are in the ReacTime Training Setup QSG and the ReacTime Championship Setup QSG.

Good to know

The Training and Championship systems share the same technology, and a Training system can be upgraded to a Championship system later. Each has its own software (Training Software or Championship Software). Both need a serial number to download trials; without one they run in demo mode, which can update firmware and language files only.

Related resources