FinishLynx receiving multiple starts

Repeated or extra starts from a wired sensor almost always come from a damaged 500-foot start cable: one spiked by an athlete, for example, which shorts the cable. The other common cause is wind setting off the sensor before the gun.

How to fix it

Bypass the long start cable

  1. Plug the sensor straight into the Start port on the connection box, or into the DB15-to-XLR cable from the camera
  2. If the repeated starts stop, the 500-foot start cable is at fault

Flex-test the cable

  1. Unplug the sensor from the end of the long cable
  2. Flex the cable along its length. If false starts keep coming with no sensor attached, the cable has a short

If the starts continue with the sensor straight into the box

  1. A normally closed sensor that starts the timer as soon as it is plugged in and won't re-arm has failed and needs replacing
  2. For the full sensor and cable check, see Two-minute sensor or cable test

If the wind sets the sensor off

Lynx doesn't sell a windscreen for the sensor, and there's no replacement part for one.

  1. Shield the sensor from the wind with any object you have handy: a box, a plastic container such as Tupperware, anything that blocks the wind

Clear a false start before the race

  1. Click the Arm button on the event window (top left, right of the start list), or click Event | Arm (Ctrl+A)
    • Arming resets the clock to 0:00, on the scoreboard too, and the event is ready for the real gun

Recover a race that ran on a false start

  1. If FinishLynx also received the real gun, it is in the start list at the top left: click it, then click the Add Selected Start icon to its right
  2. For other ways to put a start back, see Recover a race after a missed start