Boot stops partway (2000 camera)

On an EtherLynx 2000, a boot that starts but stops partway (at 80%, for example) with repeating errors usually comes from the connection path, the connection box or an Ethernet cable. Rule those out before suspecting the camera.

You don't need a separate boot file: the latest FinishLynx works with every EtherLynx camera, including the 2000, on Windows 10 and 11.

How to fix it

Update FinishLynx

  1. In FinishLynx, click Help | About to see your version
  2. If it isn't the latest, install the current version from the Software page into the same C:\Lynx folder. The steps are in Error 201

Take the connection box out of the path

  1. Connect the camera's Ethernet cable straight to the laptop, and power the camera
    • The EtherLynx 2000 is not powered over the Ethernet cable. Plug in the camera's own power cable
  2. If the boot still stops partway, try other Ethernet cables one at a time
  3. Make sure the laptop is set up for the camera (FinishLynx settings, static IP address, Wi-Fi off, firewall), as in Flashing amber BOOT light

Check the lights on the camera

  • Link lights flashing and the camera won't boot: see Flashing Link lights
  • BOOT light solid red: see 2000 camera
  • With the camera cabled straight to the laptop or a network switch, the 10Base T LINK light next to its Ethernet port should come on. If it stays off on known-good cables, the camera needs Lynx: use the button below
  • The boot still stops partway with the camera cabled straight to the laptop on a known-good cable: use the button below
  • Old system, old serial or Windows questions: Older cameras and licenses

Talk to Lynx Support

Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.

Contact Support