Older cameras and licenses
Every EtherLynx camera, however old, works with the latest FinishLynx on Windows 10 or 11. You don't need an older version of FinishLynx or a special boot file: install the current version, enter your existing serial, and connect the camera straight to the computer for the first test.
FinishLynx runs on Windows only, not on macOS.
How to fix it
Which camera is it?
- The model number is on the label on the bottom of the camera
- 5L100 or 5L200 is an EtherLynx 2000, 5L300 a Professional, 5L400 a Fusion, 5L410 a Scholastic and 5L420 a 2000+
- A 5L510 is the EtherLynx Vision Scholastic, the camera in the Scholastic package (see how to tell which one you have)
- Find your camera model and serial has the full list and what the label tells you
Install current FinishLynx
- Download the latest FinishLynx from the Software page and install it to
C:\Lynx - Enter your existing FinishLynx serial. Existing serials work with current versions
- It is 12 characters, and it isn't the camera's serial on the bottom label
- A serial from a very old version can still be used. If it is refused, see Serial number not accepted
- Install each plug-in you own (RadioLynx, Automatic Capture and others) with its own installer and serial
- No serial? See Lost serial numbers. Support can look it up from the camera's serial
Connect the camera straight to the computer
- Plug the camera into the computer with an Ethernet cable and power the camera. On an EtherLynx 2000, bypass the connection box for this first test
- The EtherLynx 2000 is not powered over the Ethernet cable: plug in its own power cable. Wiring with the connection box is in the EtherLynx 2000+, Fusion, and Pro Camera QSG
- Give the computer's Ethernet adapter a static IP address (192.168.0.5 is recommended), using the Windows 11 networking guide
- Allow
Lynx.exethrough Windows Firewall on both Private and Public networks, and turn off Wi-Fi while the camera boots - In FinishLynx, open File | Options | General, set Hardware Type to Detect and Camera Network to that static IP, click OK and restart FinishLynx
If it still won't load
- The boot bar stops partway on an EtherLynx 2000: Boot stops partway (2000 camera)
- The Link lights flash and it won't boot: Flashing Link lights
- The BOOT light stays solid red: the Solid red BOOT light page asks which camera you have and takes you to the right fix
- Any other light: FinishLynx not finding camera
Borrowing a camera from another school
- Don't look for an older FinishLynx: the current version loads every EtherLynx camera
- FinishLynx LITE (the Scholastic package) loads only Scholastic cameras (5L410, 5L510), and full FinishLynx loads only non-Scholastic ones. Check the borrowed camera's label against your edition, and ask the other school whether it runs LITE or full FinishLynx. See FinishLynx LITE vs full FinishLynx
Upgrades
The EtherLynx 2000 has no upgrade path. To move to a current Vision camera, ask Lynx sales what is available for your camera through Get a Quote on finishlynx.com.
Just took over the whole system? Start here goes through it in order.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Related resources
- EtherLynx 2000+, Fusion, and Pro Camera QSG — Guide · PDF
- Windows 11 networking guide — Guide · PDF
- Get a Quote on finishlynx.com — Link