Choosing a cable
Lynx has no specific requirement between Cat5, Cat6 or higher-rated network cable. When you buy or replace one, Cat6 is recommended, and copper runs top out at about 100 m.
How to fix it
Choosing the cable
- Buy Cat6. If it runs in conduit next to power cables, use shielded Cat6.
- Copper-clad aluminum (CCA) cable is fine for data only. Don't send PoE over it, because it has higher resistance and runs hot. If you use CCA, power the camera with a PoE+ injector at the camera end.
- A 60 m CCA run is already at the maximum recommended range for data.
How long the run can be
- The Vision-series datasheets give about 100 m from camera to computer over copper network cable, and up to 2,000 m over fiber with a converter. See the Vision PRO X Datasheet.
- A camera on a run past that limit can keep searching (flashing BOOT light) and never load. Test it on a short cable at the computer before blaming the camera.
- For permanent runs over about 300 ft, such as press box to finish line, use fiber with a media converter at each end. See Stadium wiring setup and the Installation Resources page.
No Ethernet port on the computer
- Plug in a USB or USB-C Ethernet adapter (gigabit if you also run an IdentiLynx) and connect the camera network to it.
- Set the static IP address (192.168.0.5, subnet mask 255.255.255.0) on that adapter, as in the networking guide for your version of Windows: Windows 11 or Windows 10.
- Pick that adapter under Camera Network in File | Options | General and restart FinishLynx.
- In Device Manager, turn off the adapter's power saving, and uncheck "Allow the computer to turn off this device to save power" on each USB Root Hub, so Windows doesn't drop the adapter mid-meet. See Camera dropping randomly.
- The adapter takes a USB port. If you also use a capture button, it needs a USB port of its own (or a serial port).
If the camera won't power up on its cable, see Camera won't power from the switch.
Related resources
- Vision PRO X Datasheet — Guide · PDF
- Windows 11 — Guide · PDF
- Windows 10 — Guide · PDF