Wind colors, foul/valid images and custom colors
ResulTV can show VeriLynx foul and valid images, color the wind reading red or green in your own layout, and use a color that isn't in its list. Go to the section you need.
How to fix it
Wind on a Video Display object
In FinishLynx 13.20 and later, the ResulTV_Video and VDM scripts no longer show the NWI (wind) field, so no shipped script puts the wind on a Video Display object any more.
Wind in red or green in your own layout
- Place two Wind text objects in the same spot: one green with trigger F2, and one red with trigger F3.
- Use the modified scoreboard script that sends those triggers, ResulTV-NoSwitch-WindCheck.lss. Lynx supplies it: save it in
C:\Lynxand select it as the Script of the ResulTV scoreboard in FinishLynx.
VeriLynx foul and valid images with a Video Display object (simplest)
- In VeriLynx, open the Outputs tab, click New and set Script to ResulTV_Video_VeriLynx.lss, Serial Port to Network (connect), Port 1024 and the IP Address of the ResulTV computer (127.0.0.1 if VeriLynx runs on the ResulTV computer).
- In ResulTV, add a source with Script Video Display.rss, Code Set Single Byte, Serial Port Network (listen) and Port 1024, then restart ResulTV.
- Put a Video Display object on the layout (Layout | New Video Display) with Type Dynamic and Field Video Display Data. The ResulTV Quick Start Guide walks through the Video Display setup.
Or with two bitmap objects
- In VeriLynx, set the scoreboard Script to ResulTV_VeriLynx.lss with Network (connect), Port 1024 and the ResulTV computer's IP address. This script sends the F1 (foul) and F2 (valid) triggers for you.
- In ResulTV, set that source's Script to FinishLynx.rss with Network (listen) and Port 1024.
- Add two Static bitmap objects: Foul.tga with trigger F1, and Valid.tga with trigger F2. The bitmap objects need no data Field.
- In each object's Bitmap tab, pick Foul.tga or Valid.tga as the Static File (Dynamic Dir C:\ResulTV). Leave Draw black as transparent checked so the black around the image doesn't show.
Test it, and clear the image after a few seconds
- Press the trigger key while the ResulTV display screen (not the configuration screen) is active.
- To make an image show for a few seconds and then disappear, enter the number of seconds in the object's Time field next to Trigger on the Basic tab. Leave Time blank to keep it on screen.
A color that isn't in the list
- In the color drop-down, choose Custom and enter the RGB values, for example for orange.
Manual pages: Manual and Automatic triggering of text and bitmap objects and Working with Video Display objects. For photo-finish images, logos and other output, see Output options.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Related resources
- ResulTV Quick Start Guide — Guide · PDF