Output options

ResulTV shows whatever your layout holds: running time and results, start lists, logos, flags and photo-finish images, on a TV, projector, second monitor or LED board. Below is what it can show, how to put a photo-finish image or a logo on screen, and how a trigger switches an object on.

How to fix it

What ResulTV can show

  • Running time and results, plus start lists and standings
  • Extra data your source sends, such as reaction times, lap count, projected finish time, wind readings and event records
  • Photo-finish images, flags, team colors and logos, as static or dynamic graphics
  • Text in any Windows font, including character-based languages such as Korean, Japanese and Chinese
  • Layouts at whatever resolution your display supports
  • Data from FinishLynx, FieldLynx, LynxPad and ReacTime, including more than one source at a time
  • Output to a TV, projector or second monitor as well as an LED board

What isn't there

  • Alpha channels or transparent backgrounds in the output. The only transparency is Draw black as transparent on a bitmap object.
  • Lap splits shown one at a time during a race, then the results, isn't a stock layout. Lynx can tell you whether your setup can show it before the meet.

Show a photo-finish image with the ResulTV_Video scripts (current)

  1. Set up FinishLynx and ResulTV with the ResulTV_Video script and Video Display.rss: see FinishLynx connection.
  2. In the FinishLynx image, right-click and drag a box around the part you want to show.
  3. Click Export… and save it as a .jpg in the ResulTV folder, keeping the default EEE-R-HH.jpg name.
    • To change where images are saved, edit the path in the ResulTV_Video script. ResulTV_Video_Example.lss shows how.
  4. Go to Scoreboard | Show Image (ResulTV). The image appears on the Video Display object; click it again to hide it.
  5. To skip the Export step, set Scoreboards\SetImageFile to the ResulTV folder with no file name (c:\ResulTV\.jpg when ResulTV runs on the FinishLynx computer), then draw the box, choose Set Scoreboard Image and use Show Image. The Save a copy of the image sent to the scoreboard card has the setting.

Show a photo-finish image with FinishLynx.rss and ResulTV.lss (legacy)

  1. Share the C:\ResulTV folder on the ResulTV computer with the FinishLynx computer, with read and write permissions, and check both computers are on the network.
  2. In ResulTV, use the FinishLynx.rss source script, click File | New for a new layout, then Layout | New Bitmap Object. A blank graphic object appears.
  3. Double-click the object, open the Basic tab, set Type to Dynamic and Field to Event-Round-Heat.
  4. In FinishLynx, set the scoreboard script to ResulTV.lss.
  5. With a saved, evaluated image open, right-click and drag a box around the part to show, click Export and save it in the shared C:\ResulTV folder with its default Event-Round-Heat name (for example 001-1-01). ResulTV shows the image with the event results.
  6. If the computer saves the image as a .jpg instead of a .tga, open the bitmap object's properties in ResulTV and change Dynamic File from %s.tga to %s.jpg.

The video Automatically Display FinishLynx Images on ResulTV shows this method end to end.

Show a logo

  1. On a normal layout, add a Static bitmap object with your logo (.tga, .jpg or .gif, saved in the ResulTV folder). The steps are in Images or logos not showing.
  2. Inside a Video Display object, the logo comes from the script: place the TARGA (.tga) image in C:\Lynx, open the ResulTV_Video script (for example C:\Lynx\ResulTV_Video_1line.lss) in a text editor, add a reference to the image following the overlay syntax, save the script and restart FinishLynx.
    • ResulTV_VideoDisplay_Example.lss shows how an Image block loads a picture, in that case a flag from C:\ResulTV\flags.

Show or hide an object with a trigger

Any text or bitmap object can be switched on by a trigger, either a key you press or a command in the data FinishLynx sends. This is how logos, foul and valid images and colored wind readings pop up on cue.

  1. On the configuration screen, double-click the object and open the Basic tab.
  2. In Trigger, enter the key that shows it, for example F1. Hold Shift, Control or Alt for S+, C+ or A+, for example C+F1. Avoid keys that are menu shortcuts, because the menu catches them first.
  3. In Time, enter how many seconds the object should stay up, for example 3. Leave it blank to keep it on screen.
  4. Click OK. To test, make the display screen active (Alt+Tab) and press the key.
  5. To trigger from FinishLynx, the scoreboard script has to send the same trigger. The default ResulTV.lss already does this: it shows a logo on the Time.rtv layout for 3 seconds with trigger F1 when the time stops.

Manual page: Manual and Automatic triggering of text and bitmap objects. For wind colors, VeriLynx foul and valid images and custom colors, see Wind colors, foul/valid images and custom colors.

ResulTV scripts can be customized to change the layout, colors, fonts and what is shown, and Lynx can help with that.

Talk to Lynx Support

Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.

Contact Support

Related resources