Output options

ResulTV-VDM takes data from FinishLynx, FieldLynx, FieldLynx Lite or LynxPad. Each one sends with its ResulTV-Video script on Network (connect), port 1024, to the ResulTV-VDM computer's IP address, and the script decides how the display looks.

If the two computers aren't talking yet, start with Initial connection.

How to fix it

What ResulTV-VDM can show

  • Running time, start lists, results, standings and photo-finish images, scaled to the size of your display
  • Horizontal scrolling
  • Any Windows font, including Korean, Japanese and Chinese
  • Data from one program at a time: FinishLynx, FieldLynx, FieldLynx Lite, LynxPad or ReacTime

Send from FinishLynx

  1. Run FinishLynx and click Scoreboard | Options….
  2. Click New to create a new scoreboard source.
  3. From Script, select ResulTV_Video_1line.lss.
    • ResulTV_Video_3lines.lss shows three result lines instead (set Size to 3 below).
  4. From Serial Port, select Network (connect).
  5. Enter 1024 for the Port.
  6. In the IP Address field, type the IP address of the ResulTV-VDM computer.
  7. Set Running Time to Normal.
  8. Set Results to Auto and Size to 1, check Always Send Place, then click OK.
  9. Close and restart FinishLynx.

Send from FieldLynx or FieldLynx Lite

  1. Open FieldLynx or FieldLynx Lite and select Options | Preferences….
  2. Select the Scoreboard tab.
    • FieldLynx Lite already includes the Scoreboard plug-in; full FieldLynx needs the separate FieldLynx Scoreboard plug-in. See Scoreboard plug-in and settings.
  3. Click New to create a new scoreboard source.
  4. From Results Scripts (Metric and English), select ResulTV_Video_results.lss.
  5. From Standings Scripts, select ResulTV_Video_standings.lss.
  6. From Serial Port, select Network (connect).
  7. Enter 1024 for the Port.
  8. In the IP Address field, type the IP address of the ResulTV-VDM computer.
  9. Close and restart FieldLynx.

Send from LynxPad

  1. Click Scoreboard | Options and click New.
  2. From Script, select the ResulTV-Video script, then select Network Connect and enter Port 1024 and the IP address of the ResulTV-VDM computer.
  3. Results are sent when you click Scoreboard | Display current event (or Scoreboard | Display Team Scores). Details are in Sending data to a scoreboard.

The ResulTV-VDM Quick Start Guide has the FinishLynx steps with screenshots, and the ResulTV-VDM Datasheet lists what it supports.

Good to know

Since FinishLynx 13.20 the ResulTV_Video scripts no longer show the wind (NWI) field, so a wind reading that used to appear in the header is gone by design.

Related resources