False start not detected or called on every start
ReacTime flags a false start when the athlete moves before the gun or within the first 0.100 seconds after it, and the starters hear three strong beeps in the headset.
How early it looks and how much movement it takes are set by two Detection settings, Threshold and Active Time. Most "too sensitive" or "never detects" reports come back to those and to the gun sensor type.
How to fix it
Check the detection settings
- Threshold: Normal is recommended for most athletes, Aggressive for lightweight athletes, such as high school girls
- Leave it at the default if you are unsure
- Active Time sets how long before the gun the system watches for movement
- The range runs from -2.0 seconds before the gun to 2.0 seconds after the Set command. A positive value such as 0.3 From Set means movement in the first 0.3 seconds after Set is not called
- On a Block Sensor, both are under Main Menu | Training, then Training Menu | Detection, then Threshold or Active Time. On the Command Center, press Menu and go to the Detection menu
- If false starts always report the same number, see Reaction times cluster at one value
Check the gun and recall settings
- The gun sensor type must match the sensor you have
- The Command Center ships set to Norm. Closed. On a Training system, set Training Menu | Gun Source to Norm. Open or Norm. Closed for a gun sensor, or Internal for the Start Button
- Fire Recall fires a second electronic gun sound from all loudspeakers when a false start is detected. It ships set to No
- To turn it on at the Command Center: Menu, Main Menu | System, Menu, scroll to System Menu | Fire Recall, Menu, then choose Yes
- To review what the sensor saw, open the race in the Championship Software and click the Show Legal icon
- Motion before the legal line is a false start; a legal chart has no motion before it
The settings are listed in the Block Sensor Menu Reference and the Command Center reference; the ReacTime False Start Detection Datasheet has the World Athletics and USATF rule wording.
Good to know
On a Training system the LCD shows a false start as FS- followed by the time, for example FS-0.356, which is how long before the gun the athlete left the blocks.
Related resources
- ReacTime False Start Detection Datasheet — Guide · PDF