Sensor battery drains or won't charge

Fully charged, a Championship system lasts about 2 hours wireless or about 8 hours wired, running a race every five minutes, and less if trials are being uploaded to a computer. A Training sensor lasts about 8 hours at a trial every 4 to 5 minutes.

If your run time is well under that, or one or two sensors drain while the rest hold up, start with a full recharge and a battery check.

How to fix it

Recharge properly

  1. Turn off every Block Sensor and the Command Center before charging
  2. Championship: plug the System Charger into an outlet and connect all Block Sensors and the Command Center to it. Wait at least four hours
  3. Training: with the sensor off, connect the power supply
    • The LCD reads "Fast Charging," changes to "Slow Charging" after about 3 hours, and dims completely after about four hours
  4. A unit is fully charged when you unplug it, turn it on, and the battery icon in the top right of the LCD is completely shaded
  5. Before the meet, turn each unit on off the charger and confirm that icon is fully shaded
    • To see a percentage, press Menu, scroll to Main Menu | Settings, then Settings Menu | Battery Level

If some sensors still drain fast

  • Note which lanes drop (for example, under 20% while the others sit near 85% after the same meet). Sensors that repeatedly run down while the rest hold charge have a hardware or battery problem and need a repair: submit an RMA and send them in to Lynx
  • On a wired system with power at the track, run the sensors from the Command Center power supply instead. Plug it into the Command Center's Power Supply input and all eight sensors are powered through the False Start Cables

The charging steps are in Recharge the ReacTime Championship System, Power and Turn On the Block Sensor and Power On the Block Sensors.

Good to know

The battery percentage is not very accurate. Block Sensors and the Command Center will run for over an hour after the LCD shows 0%. Charging from a fully drained battery takes about 4 hours.

Send it in for repair

Start an RMA. The portal walks you through what to include and where to ship it.

Submit an RMA