Camera body or ports damaged

An IdentiLynx or VeriLynx that was dropped or blown over usually needs one of three things: the lens pushed back into place, a replacement lens, or a repair. Match the damage to the case below.

How to fix it

Lens knocked out of place or auto-focus no longer works

  1. On an IdentiLynx HRS or SR you can re-seat the lens yourself: see Image is blurry and can't focus

Lens snapped off

  1. Look at the front of the camera. If the broken plastic lens threads can be unscrewed from the camera and the camera is otherwise undamaged, you only need a replacement lens from Lynx
  2. If the threads are stuck in the camera, or the camera itself is damaged, the camera needs a repair: submit an RMA and send it in to Lynx

Other damage to the body or ports

  1. A cracked body, a damaged Ethernet port or bent pins need a repair: submit an RMA and send the camera in to Lynx

The camera got wet

  1. Power it off, let it dry out completely, and see Rain and weather protection

To keep the camera from blowing over again, see Tripod blows over or shifts in wind. For a replacement lens, or anything that needs repair, use the button below and describe the damage.

Send it in for repair

Start an RMA. The portal walks you through what to include and where to ship it.

Submit an RMA